Overview

Suitable for use on interior wood and metals, Dulux Trade Eggshell is solvent based with a mid sheen finish. It's tough and durable and doesn't need an undercoat, except where the colour change is strong.

• Self undercoating
• Tough and durable

Preparation

To get the best results, ensure surfaces to be painted are sound, clean, dry and free from defective or poorly adhering materials like grease, wax and dirt.

• New surfaces particularly must be fully dry.
• Prime new or bare surfaces with an appropriate Dulux Trade primer.
• Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
• Treat knots with an appropriate knotting solution.
• Any surface defects should be filled with the appropriate filler.

Application

We recommend always follow the manufacturer's instructions found on the tin. Stir thoroughly, it is recommended that a small test area is applied before painting the entire surface to ensure compatibility.

• Stir the Dulux Trade Eggshell thoroughly before use.
• Apply 2 full coats with a brush or roller only. For health and safety reasons associated with solvent based paints, do not spray.
• Where a strong colour change is required, then a coat of in an appropriate colour may be needed.

Note: Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster in areas with no or low natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as .

Aftercare & Storage